Don't Miss
enes

DuROCK Components

DuROCK Components

FIBREGLASS MESH

Mesh for DuROCK Exterior Insulation Finish Systems is made of alkali-resistant fibreglass. All mesh is made by a DuROCK-approved manufacturer, with DuROCK’s logo plainly visible on the 5 ounce and high-impact reinforcing mesh products.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS

EPS BOARD

Expanded Polystyrene (EPS) insulation board for DuROCK Exterior Insulation Finish Systems is made of 100% virgin polystyrene resin, aged and cut in accordance with the requirements of ASTM E2430, and compliant with ULC-S701. EPS insulation board is made by a DuROCK-approved manufacturer, and is packaged in bags with DuROCK’s logo plainly visible. Please refer to EIF System specifications for applicable thicknesses & sheet size.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS

PUCC-ROCK

DuROCK PUCC-ROCK insulation is non-combustible mineral fibre/wool manufactured by Rockwool, compliant with CAN/ULC-S702.1 and CAN/ULC-S 114. Thermal resistance value is RSI 0.70 per 25 mm (R 4.0 per inch). PUCC-ROCK insulation incorporates a geometrically defined drainage cavity (GDDC) on the backside that is 10 mm deep and 37% open. PUCC-ROCK insulation includes an integral alkali-resistant fibreglass mesh on the front side. PUCC-ROCK insulation is available in 51, 76, 102, 127, and 152 mm (2, 3, 4, 5, and 6 inch) thicknesses.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS

UNI-TRACK

DuROCK’s patented Uni-Track is a PolyVinyl Chloride (PVC) extrusion designed to be used at horizontal terminations and at horizontal joints where DuROCK Exterior Insulation Finish Systems are expected to drain. Its one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Uni-Track is three inches (76 mm) high, one inch (25 mm) wide, and ten feet (3.05 m) long. It is white in colour, but can be painted with most exterior latex paints.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS

UNI-FLASH

DuROCK’s patented Drainage Flash is a PolyVinyl Chloride (PVC) extrusion designed to be used at window head locations where DuROCK Exterior Insulation Finish Systems are expected to drain. It’s one- size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Drainage Flash is ten feet (3.05 m) long and is available in 1 3/4 inch (46 mm) and 2 inch ( 52 mm) widths. It is white in colour, but can be painted with most exterior latex paints.

DOWNLOAD DOCUMENTS – DATA SHEET

SOPRAGRIP – EIFS TAPE

SOPRAGRIP F is a self-adhesive membrane composed of SBS modi!ed bitumen and a non-woven polyester exposed reinforcement. The self-adhesive side is protected by a silicone release !lm. The non-woven polyester top surface provide good adhesion properties for liquid applied air/vapour barrier and exterior !nishing coating. SOPRAGRIP F is used as a cover strip over COLPHENE ICF membranes top termination. It is also used as reinforcement over gypsum or concrete board joints before installation of a liquid air/vapour barrier membrane.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS