Benner Hot News:
enes

DuROCK STUCCO PRODUCTS

 

DuROCK Stucco Products:

DuROCK Barrier Coats DuROCK Leveiling Coats DuROCK Base Coats & Adhesives DuROCK Components DuROCK Finishes DuROCK Specialty

Barrier Coats

VAPOUR BLOCK

DuROCK Vapour Block is formulated with a co-polymer styrene-butadiene emulsion. It is a trowel applied high performance coating, applied onto non-combustible substrates as an air, vapour, and moisture barrier for DuROCK PUCCS and InsulROCK Systems. The low water absorption combined with a high flexural strength makes Vapour Block an ideal water penetration barrier for use on exterior wall systems; in particular glass-fibre faced gypsum sheathing, cement board, concrete, or masonry substrates. Check with DuROCK for use on other substrates. As part of an air barrier system for a wall assembly, Vapour Block is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants. Refer to DuROCK system specifications for product specific guidelines.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

ROLLER BEAR

Roller Bear is intended for use as the first coat in a two-coat moisture barrier system that serves as the second plane of protection behind DuROCK PUCCS EIFS. Roller Bear is a factory-blended, ready-to-use, non- cementitious, polymeric coating that is supplied in 19 L (5 US gallon), 28 kg (62 lb) pails and is applied by spray, brush, or roller in a continuous layer to achieve a minimum dry thickness of 0.28 mm (11 mils) per coat.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

POLAR BEAR

DuROCK Polar Bear is formulated with a 100% acrylic emulsion. It is a trowel-applied high performance coating for use over wood substrates as both an air and moisture barrier, in particular for the DuROCK PUCCS RMC-1 and InsulROCK RMC-1 Systems. Polar Bear contains fibers that enhance the cohesive and tensile strength for added durability. Polar Bear can also be used as an insulation adhesive. The low water absorption combined with a high flexural strength makes Polar Bear an ideal water penetration barrier for use on exterior wall systems; in particular plywood 12.7 mm (½ inch) thick and oriented strand board (OSB), minimum 11.1 mm (7/16 inch) thick. Check with DuROCK for use on other substrates. As part of an air barrier system for a wall assembly, Polar Bear is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants. Refer to DuROCK system specifications for product specific guidelines.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

CEMENT BEAR

DuROCK Cement Bear is formulated with a 100% acrylic emulsion that is field-mixed with Portland Cement. It is a trowel-applied high performance coating for use on non-combustible substrates, as an air and moisture barrier for DuROCK PUCCS and InsulROCK Systems. Cement Bear contains fibres that enhance the cohesive and tensile strength for added durability. Cement Bear can also be used as an insulation adhesive. The low water absorption combined with a high flexural strength makes Cement Bear an ideal water penetration barrier for use on exterior wall systems; in particular glass-fibre faced gypsum sheathing, cement board, concrete or masonry substrates. Check with DuROCK for use on other substrates. As part of an air barrier system for a wall assembly, Cement Bear is compatible with most transition membranes comprised of bituminous SBS with fabric or cross-laminated polyethylene backing, as well as bituminous mastics and polyurethane foam sealants. Refer to DuROCK system specifications for product specific guidelines.

 

DuROCK Leveling Coats

ONE STEP READY MIX

DuROCK One Step Ready Mix is a formulated dry-mix cement parging, leveling coat and stucco base coat that is field-mixed with water. It is a trowel-applied polymer modified cement plaster, a mixture of Portland cement, silica sand, and dry-resins. It is a versatile product that can be used as a leveling coat for conventional stucco, concrete and masonry substrates, and also as the scratch and brown coats for DuROCK Stucco Plus.One Step Ready Mix has the benefit of high-early compressive and tensile strength, with excellent freeze-thaw stability and low water absorption. It is a convenient product since it requires only water to be added on site.One Step Ready Mix contains 1/4″ fibers that enhance the cohesive and adhesive strength for added durability. It is also a low-shrinkage polymer modified cement that makes it ideal for uneven leveling coats.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

BIG EXTRA (BRUSH IT GREY)

B.I.G Extra is a dry mix cement parge specifically designed to enhance the appearance of cast-in-place concrete walls. B.I.G Extra is polymer modified and requires only the addition of water. B.I.G Extra hides surface irregularities such as cold joints, colour variations, and form distortions. B.I.G Extra can also be used to disguise minor cracking and honeycombs. B.I.G Extra is available in 44 lb (20 kg) bags.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

ONE STEP CONCENTRATE (EXPORT ONLY)

DuROCK One Step Concentrate is a formulated dry-mix concentrate for use in cement parging, leveling coats and stucco base coats. It is field-mixed with Portland cement, silica sand and water. One Step Concentrate is a trowel or spray-applied polymer modified cement plaster, a mixture of minerals, fine aggregates, and dry-resins. It is a versatile product that can be used as a leveling coat for conventional stucco, concrete and masonry substrates, and also as the scratch and brown coats for DuROCK Stucco Plus.One Step Concentrate has the benefit of high-early compressive and tensile strength, with excellent freeze-thaw stability and low water absorption. One Step Concentrate contains 1/4″ fibers that enhance the cohesive and adhesive strength for added durability. It is also a low-shrinkage polymer modified cement that makes it ideal for uneven leveling coats.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

DuROCK Base Coats & Adhesives

B2000

DuRock B2000 is an acrylic-modified cementitious dry mix base coat designed for use over Expanded Polystyrene (EPS) Insulated Concrete Forms (ICF). B2000 forms a strong yet flexible, crack resistant base coat that is intended for use on the exterior, above-grade portion of ICF foundation walls. B2000 has high flexural and bond strength, is water vapour permeable, and has excellent freeze/thaw stability with low water absorption and low shrinkage.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

PREP COAT

DuROCK Prep Coat is 100% acrylic emulsion that is field-mixed with Portland Cement. It is a trowel-applied high performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

PREP COAT PLUS

DuROCK Prep Coat Plus is 100% styrene acrylic emulsion that is field-mixed with Portland Cement. It is a trowel-applied high performance coating for use on DuROCK PUCCS RMC and InsulROCK RMC Systems as a base coat and adhesive with enhanced flexibility and strength. Prep Coat Plus is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, and breathable to water vapour. Prep Coat Plus can be applied as a high-build leveling coat, for added impact resistance on EIFS or to make a wall plumb and flat, applied up to 6.4 mm (1/4 inch) thick in a single pass if required.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

PREP COAT D

DuROCK Prep Coat is dry polymer based dry-mix material that is field-mixed with water. It is a trowel-applied high performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat D is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

PREP COAT Q

DuROCK Prep Coat Q is a fast drying, dry polymer based dry-mix material that is field-mixed with water. It is ideal for use in cold temperature, high humidity conditions. It is a trowel-applied high performance coating for use on DuROCK PUCCS and InsulROCK Systems as a non-combustible base coat and adhesive. Prep Coat Q is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

PERFECT PARGE

DuROCK Perfect Parge is a polymer based dry-mix material that. It is a trowel-applied adhesive for use in the attachment of decorative moldings and EPS trim on DuROCK PUCCS and InsulROCK Systems. Perfect Parge is a flexible and durable base coat that can also be used as a leveling coat for stucco, concrete and masonry substrates. It has excellent freeze-thaw stability, low water absorption, breathable to water vapour and non-combustible. It is a convenient product since it requires only water to be added on site.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

PREP COAT NCP

DuROCK NCP, Non-cementitious Prep Coat, is formulated with a 100% styrene acrylic emulsion. It is a trowelapplied high performance coating for use as an optional base coat on the DuROCK PUCCS RMC and InsulROCK RMC Systems, as well as the DuROCK Exterior Finish Systems. NCP is a factory-mixed base coat that does not require the addition of water or Portland cement.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS (ENG. & FR.)

DuROCK Components

FIBREGLASS MESH

Mesh for DuROCK Exterior Insulation Finish Systems is made of alkali-resistant fibreglass. All mesh is made by a DuROCK-approved manufacturer, with DuROCK’s logo plainly visible on the 5 ounce and high-impact reinforcing mesh products.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS

EPS BOARD

Expanded Polystyrene (EPS) insulation board for DuROCK Exterior Insulation Finish Systems is made of 100% virgin polystyrene resin, aged and cut in accordance with the requirements of ASTM E2430, and compliant with ULC-S701. EPS insulation board is made by a DuROCK-approved manufacturer, and is packaged in bags with DuROCK’s logo plainly visible. Please refer to EIF System specifications for applicable thicknesses & sheet size.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS

PUCC-ROCK

DuROCK PUCC-ROCK insulation is non-combustible mineral fibre/wool manufactured by Rockwool, compliant with CAN/ULC-S702.1 and CAN/ULC-S 114. Thermal resistance value is RSI 0.70 per 25 mm (R 4.0 per inch). PUCC-ROCK insulation incorporates a geometrically defined drainage cavity (GDDC) on the backside that is 10 mm deep and 37% open. PUCC-ROCK insulation includes an integral alkali-resistant fibreglass mesh on the front side. PUCC-ROCK insulation is available in 51, 76, 102, 127, and 152 mm (2, 3, 4, 5, and 6 inch) thicknesses.

DOWNLOAD DOCUMENTS – DATA SHEET – SDS

UNI-TRACK

DuROCK’s patented Uni-Track is a PolyVinyl Chloride (PVC) extrusion designed to be used at horizontal terminations and at horizontal joints where DuROCK Exterior Insulation Finish Systems are expected to drain. Its one-size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Uni-Track is three inches (76 mm) high, one inch (25 mm) wide, and ten feet (3.05 m) long. It is white in colour, but can be painted with most exterior latex paints.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS

UNI-FLASH

DuROCK’s patented Drainage Flash is a PolyVinyl Chloride (PVC) extrusion designed to be used at window head locations where DuROCK Exterior Insulation Finish Systems are expected to drain. It’s one- size-fits-all profile eliminates the need to stock different profiles for every insulation thickness. DuROCK Drainage Flash is ten feet (3.05 m) long and is available in 1 3/4 inch (46 mm) and 2 inch ( 52 mm) widths. It is white in colour, but can be painted with most exterior latex paints.

DOWNLOAD DOCUMENTS – DATA SHEET

SOPRAGRIP – EIFS TAPE

SOPRAGRIP F is a self-adhesive membrane composed of SBS modi!ed bitumen and a non-woven polyester exposed reinforcement. The self-adhesive side is protected by a silicone release !lm. The non-woven polyester top surface provide good adhesion properties for liquid applied air/vapour barrier and exterior !nishing coating. SOPRAGRIP F is used as a cover strip over COLPHENE ICF membranes top termination. It is also used as reinforcement over gypsum or concrete board joints before installation of a liquid air/vapour barrier membrane.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS

DuROCK Finishes

TROWEL FINISHES

DuROCK Trowel Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours. DuROCK Trowel Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultra-violet resistant finishes consisting of granulated quartz or marble, pigment, resin and other additives specially formulated for both exterior and interior use. DuROCK Trowel Finishes are ideally suited for both new and/or retrofit construction. DuROCK Trowel Finishes are available in several textures distinguished by their aggregate size and application technique. Coarse Coat, Desert Sand, Grain, Marble Coat, Max Coat, Pebble Rock, Sand Coat, Spacco, and Venetian finishes are trowel-applied coatings designed for use over wall and ceiling areas. Fine Coat and Pebble Coat finishes are trowel-applied coatings designed for use over details such as cornice, quoins, columns, etc.

DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET  – VENETIAN SDS – COARSE COAT SDS – FINE COAT SDS – FINE STONE SDS – FINO SDS – MARBLE COAT COARSE SDS – MARBLE COAT FINE SDS – MARBLE COAT SDS – MAX COAT SDS – PEBBLE COAT SDS – PEBBLE FINE SDS – PEBBLE ROCK FINE SDS – PEBBLE ROCK SDS 

DOWNLOAD DOCUMENTS (FRENCH) – VENETIAN SDS – COARSE COAT SDS – FINE COAT SDS – FINE STONE SDS – FINO SDS – MARBLE COAT COARSE SDS – MARBLE COAT FINE SDS – MARBLE COAT SDS – MAX COAT SDS – PEBBLE COAT SDS – PEBBLE ROCK FINE SDS – PEBBLE ROCK SDS 

SPRAY FINISHES

DuROCK Spray Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours. DuROCK Spray Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of silica sand, pigment, resin and other additives formulated for both exterior and interior use. DuROCK Spray Finishes are ideally suited for both new and/or retrofit construction. Whereas Pebble Spray and Fine Spray are intended for details only, the remaining DuROCK Spray Finishes are designed for use over wall and ceiling areas.

DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – SPRAY SDS – AIRLESS SDS – PEBBLE SPRAY SDS – ROLL ON SDS – ROLL ON COARSE SDS

DOWNLOAD DOCUMENTS (FRENCH) – SPRAY SDS – AIRLESS SDS – PEBBLE SPRAY SDS  – ROLL ON SDS – ROLL ON COARSE SDS

PLUS FINISHES

DuROCK Plus Finishes are formulated with 100% acrylic emulsions designed especially for use in elastomeric wall coatings, providing outstanding exterior durability, as well as excellent elasticity and elongation properties that are required to bridge continually over cracks without wrinkling. Due to the low glass-transition temperature, these finishes are able to maintain flexibility across a broad range of temperatures.DuROCK Plus Finishes can be color-tinted, and are intended for application on vertical wall surfaces. These finishes are most effective when applied over rigid substrates (such as cement plasters and concrete), and can also be used with DuROCK EIFS and Exterior Finishing Systems. DuROCK Plus Finishes are formulated to have excellent dirt-pick-up resistance, and superior water resistance as well as resistance to chalking. The dirt pick-up resistant chemistry of DuROCK Plus Finishes enables the coating to maintain its attractive appearance, while providing superior resistance to the effects of acid rain, pollution and ultra-violet light. Water beads on the surface thereby washing away the dirt. DuROCK Plus Finishes are permeable to water vapour, which permits open vapour diffusion through wall assemblies.

DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – AIRLESS PLUS SDS – MARBLE COAT COARSE PLUS SDS – MARBLE COAT FINE PLUS SDS –MARBLE CLOAT PLUS SDS – MAX COAT PLUS SDS – PEBBLE COAT PLUS SDS – PEBBLE ROCK FINE PLUS SDS – PEBBLE ROCK PLUS SDS – ROLL ON PLUS SDS – SAND COAT PLUS SDS – SPACCO PLUS SDS – SPRAY PLUS SDS – VENETIAN PLUS SDS

DOWNLOAD DOCUMENTS (FRENCH) – AIRLESS PLUS SDS – MARBLE COAT COARSE PLUS SDS – MARBLE COAT FINE PLUS SDS –MARBLE CLOAT PLUS SDS – MAX COAT PLUS SDS – PEBBLE COAT PLUS SDS – PEBBLE ROCK FINE PLUS SDS – PEBBLE ROCK PLUS SDS – ROLL ON PLUS SDS – SAND COAT PLUS SDS – SPACCO PLUS SDS – SPRAY PLUS SDS – VENETIAN PLUS SDS

ROLLER FINISHES

DuROCK Roller Finishes are premixed, water-based, 100% acrylic coatings available in several textures and unlimited colours. DuROCK Roller Finishes are flexible, breathable, water-repelling, dirt pick-up resistant (DPR), ultraviolet resistant finishes consisting of fine fillers, pigment, resin and other additives formulated for both exterior and interior use. DuROCK Roller Finishes are ideally suited for both new and/or retrofit construction. Roll On (small aggregate), Roll On Coarse (large aggregate) and Airless (no aggregate) are intended for use on decorative mouldings and a variety of wall surfaces.

DOWNLOAD DOCUMENTS (ENGLISH) – DATA SHEET – ROLL ON SDS – ROLL ON COARSE SDS – AIRLESS SDS – BASE COAT PRIMER SDS

DOWNLOAD DOCUMENTS (FRENCH) – DATA SHEET – ROLL ON SDS – ROLL ON COARSE SDS – AIRLESS SDS – BASE COAT PRIMER SDS

ROLL-ON

____________________________________________

ROLL-ON COARSE

____________________________________________

FINECOAT

____________________________________________

SPRAY

____________________________________________

PEBBLE SPRAY

____________________________________________

PEBBLE ROCK

____________________________________________

CRYSTAL COAT

____________________________________________

SPACCO

____________________________________________

COARSE COAT

____________________________________________

SAND COAT

____________________________________________

MARBLE COAT

____________________________________________

MARBLE FINE

____________________________________________

VENETIAN

____________________________________________

MAX COAT

____________________________________________

PEBBLE COAT

____________________________________________

GEMSTONE FINE

____________________________________________

GEMSTONE

____________________________________________

GLITTEROCK

____________________________________________

MOONSTONE

____________________________________________

SHIMMER STONE

 

DuROCK Specialty


ANGELSTONE/GLITTEROCK

DuROCK Angel Stone is ideal for use in interior or exterior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. DuROCK Angel Stone is a decorative textured protective coating engineered for use over any DuROCK system. DuROCK Angel Stone is a 100% acrylic finish containing bronze mica flakes and pearlescent pigments giving the finish a shimmering effect. DuROCK Angel Stone is a trowel-applied finish texture available in hundreds of colours.

DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS

DOWNLOAD DOCUMENTS (French) – SDS

TRICOL

DuROCK Tricol finish is a premixed, water-based, acrylic, quartz stone finish available in many colour combinations. DuROCK Tricol can be both trowel and spray-applied, used for wall and ceiling areas, as well as for details such as cornice, quoins, columns, etc.

DOWNLOAD DOCUMENTS – DATA SHEET – MSDS

GEMSTONE

DuROCK Gemstone finish is a premixed, water-based, acrylic, quartz stone finish available in many colour combinations. DuROCK Gemstone can be both trowel and spray-applied, used for wall and ceiling areas, as well as for details such as cornice, quoins, columns, etc.

DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS

DOWNLOAD DOCUMENTS (French) – SDS

UNIGUM

Unigum is designed for use where an elastic, waterproof, dirt-resistant coating is required. Unigum is a premixed, water-based, elastomeric acrylic coating available in unlimited colours. Unigum actually bridges cracks – spanning the crack as it expands – and returning to its original form when the crack contracts. Unigum’s ability to resist ultraviolet degradation and its low-temperature flexibility ensures it will retain its colour and overall appearance for years to come.

DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS

DOWNLOAD DOCUMENTS (French) – SDS

SPACCO

DuROCK Spacco is a decorative protective coating designed for use as a textured free hand faux finish. DuROCK Spacco is ideal for use in both interior and exterior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. DuROCK Spacco is a 100% acrylic, flexible, breathable coating. DuROCK Spacco is a trowel-applied finish texture and upon request, can be custom coloured to match any customer-specified colour.

DOWNLOAD DOCUMENTS (English) – DATA SHEET – SDS

DOWNLOAD DOCUMENTS (French) – SDS

CRYSTAL COAT

DuROCK Crystal Coat is a gypsum-based decorative textured protective coating designed for use as a textured, free hand faux finish base coat. It has been designed to replace conventional gypsum based architectural wall finishes. DuROCK Crystal Coat is ideal for use in interior applications, in new construction or renovations, and in commercial, industrial, institutional and residential projects. DuROCK Crystal Coat is a 100% acrylic, flexible, breathable coating.

DOWNLOAD DOCUMENTS (English) – DATA SHEET SDS

DOWNLOAD DOCUMENTS (French) – SDS

POOL QUARTZ

Pool Quartz is a complete pool plaster mix that is a combination of white Portland cement, crushed marble, mineral fillers, additives and 3M Colour Quartz. Pool Quartz cures to a smooth, hard surface. Pool Quartz has excellent abrasion resistance and with the addition of 3M Colour Quartz it performs upwards of three times better against both mechanical and chemical wear compared to conventional plaster.

DOWNLOAD DOCUMENTS (English) – DATA SHEET SDS

DOWNLOAD DOCUMENTS (French) – SDS

Where to buy Benner Products?

Phone:
(787)962-3419

Retail Store:
PR-189 Km 2.6, Caguas,
Puerto Rico 00725

Caribbean Office:
PO Box 361650, San Juan
Puerto Rico 00936-1650

/ BESTBENNERBUILDING.COM BENNERPRODUCTS.COM WEBSITE TAGS / Aluminum Ceiling | Mineral Fiber Ceiling | Suspension System | Vinyl Flooring | Benner Products | Vinyl Floor | Reflective Insulation | Caguas | Bathroom Partitions | 3D Walls | Acoustical  Ceiling | Drop Ceiling | false ceiling | Main Tee | Cross Tee | Wall Angle | Fastening | Wood floor |Benner Products | marble floor | Caguas | carpet floor | Insulation | Wood Ceilings | Office ceiling | open cell ceiling | Building Materials | Building materials  supplier | against mold | Aluminun Ceiling Color Chart | Aluminun Ceiling Wood Color Chart | free on-line education | efficiency | Benner Products | greenbuild | reciclied materials | products catalog | clean room floor | clean room ceilings | Benner Solar System | cleanroom walls | Building Insulation | duct insulation | wall finishes |  pvc walls | Caguas | exterior finish insulation system | stucco | decorative floor | stone finish | Benner Products | walkways floors | terraces floor | seamless floor | Caguas | pool areas floor | Benner | patios floor | textured  wall | ceramic plaster glazed | venetian finish | anti slip floors | pvc walls | plafones acusticos | Caguas | techos acustico | losas acustica | pisos acusticos | plafones aluminio | vct floor | Puerto Rico | Ponce | aislacion reflectiva | Caguas | aislacion termica | aislacion ducto | aislacion aire | DuROCK |